Authorized maintenance

北京卡斯托斯维修服务中心

卡斯托斯

VIP客户服务热线:

TEL:400-061-9500
卡斯托斯
保养维修您的卡斯托斯腕表
Maintain and repair your watch
当前位置:主页 > 腕表资讯 >

卡斯托斯手表走时不准

作者:卡斯托斯维修服务中心 日期:2021.03.27

      卡斯托斯手表走时不准,今天北京卡斯托斯维修中心为大家分享处理卡斯托斯手表走时不准的小技巧。这件事是我们普遍很是关心的其实,谁不想自己的表走的正常,假如是手的话有些大秒针不会走,一般三眼计时指针表通常长秒针不走,只有计时才走,三小盘中有一小盘一直走的才是时针,这就是动力节省设计,大多数计时表都是这样,接下来北京卡斯托斯维修服务中心为大家解答。

      Kastos watch is out of time. Today, Beijing kastos maintenance center will share some tips on how to deal with kastos watch out of time. This is something we are generally concerned about. In fact, who doesn't want his watch to go normally? If it's a hand, some big second hands won't go. Generally, the three eye Chronograph usually doesn't go with a long second hand and only goes with time. One of the three small clocks always goes with the hour hand. This is the power saving design. Most chronographs are like this. Next, Beijing castos will repair them The service center answers for you.

      1、知道的话也是比较有用的,我们还是要好好的爱护,了解它。由于这种表的振荡器的振频和振荡器容量是由手振荡器的振荡频率或振荡器的容量控制的,所以手表很难调整,可能是由于机芯受潮,或者机芯需要洗油或调整。手表速度减慢可能是由于手表动力不足造成行走速度减慢,需要及时补充动力。机械表就是把势能转换成动能的表,因此不需要依靠电池来产生电力。

      1. If you know it, it's also useful. We should take good care of it and understand it. Since the oscillator frequency and oscillator capacity of the watch are controlled by the oscillator frequency or oscillator capacity of the hand oscillator, it is difficult to adjust the watch. It may be because the movement is affected with damp, or the movement needs oil washing or adjustment. The slowing down of the watch may be due to the insufficient power of the watch, which leads to the slowing down of the walking speed and needs to supplement the power in time. A mechanical meter is a meter that converts potential energy into kinetic energy, so it doesn't need batteries to generate electricity.

卡斯托斯石英表走时不准(图)

      2、其实是按照能量守恒定律,有多少动力势能转换成多少动能,我们把机械表称为上弦,意思是说,实机械表内部开始储存势能,上弦之后,势能转换成动能,使指针保持运动状态,即保持表走时精确。通常我们手表走时不准确,都是因为能量耗尽的原因,机械表内部的势能会耗尽,这样就会出现能量储存不足的情况,那么机械的动力也会耗尽,久而久之,指针的运动就会越来越慢,因此我们需要给机械表,即可以把指针的转速改回原转速。

      2. In fact, according to the law of conservation of energy, how much dynamic potential energy is converted into how much kinetic energy, we call the mechanical watch the top chord, which means that the potential energy is stored inside the real mechanical watch. After the top chord, the potential energy is converted into kinetic energy to keep the pointer in motion, that is, to keep the travel time of the watch accurate. Usually, the inaccurate travel time of our watch is due to the exhaustion of energy. The potential energy inside the mechanical watch will be exhausted. In this way, there will be insufficient energy storage, and the mechanical power will also be exhausted. As time goes by, the movement of the pointer will be slower and slower. Therefore, we need to give the mechanical watch, that is, we can change the speed of the pointer back to the original speed.

      北京卡斯托斯维修中心温馨提示:用表简直是最常见的,但要保护还是要坚持。美丽又实用,但懂得珍惜才是关键,很多人都要利用表显示气质,爱惜外表尤其重要。长期使用还要注意保养。如有任何疑问,请致电服务热线,北京卡斯托斯维修中心为大家解答。

      Beijing castos maintenance center warm tips: watch is the most common, but to protect or insist on. Beautiful and practical, but it is the key to know how to cherish, many people have to use the table to show temperament, cherish appearance is particularly important. Long term use should also pay attention to maintenance. If you have any questions, please call the service hotline and Beijing castors Service Center for answers.

本文链接:http://www.omegamaintain.com/llszx/399.html

上一篇:没有了
腕表资讯
常见问题
卡斯托斯手表受磁怎么办
版权所有:卡斯托斯维修服务中心 Copyright © 2018-2032 | XML
客户服务热线:400-061-9500

腕表服务线上预约

Chinese

关闭
备注信息:
400-061-9500
客服在线时间:7:00-22:00
温馨提示:非在线时间的预约将在客服上线后联系您

客户服务

在线咨询

VIP服务热线

400-061-9500